Ok finally took the transmission and clutch off this week. Cross shaft frame bracket's hole is egg-shapped and not really straight and 2 washers are ...
Thanks for the feedback. If by clutch shaft you mean main drive gear it is indeed damaged. [urlHere[/url] Does somebody have a good picture of ...
This is the Dexron III I used. Technical sheet: [url
Yes indeed. Just to be sure, can the trans bearings be involved in my problem ? I did not noticed any abnormal play but a little one though.
I don't know to be honest. I have no history regarding the clutch so it can even be 20 years old. I'll rinse and fill with Dexron III because it have ...
The gearbox is back in the car and works smoothly with no noises π Al couldn't help me as all of his clusters for '53 are 32-25-19-14 and didn't c...
Thanks, I'm in touch with Al. Only problem is the teeth count: mine is 32-24-19-14 but his books tell 32-25-19-14. 32-25-19-14's are said to be c...
The trans if now out of the car. It was an easy job since it goes out without the bellhousing. I removed the floor pan, universal joint bolts, OD wir...
Trans body is bolted indeed to the bellhousing by 4 bolts but I don't know how it's made inside. Will have a look on the manual and try to leave the...
You people science is indeed valuable and welcomed π Just a last though before pulling the trans: since it has an overdrive which the solenoid isΕ...
Hello there, It appears it's well a bearing noise since the cogs are in good shape. I took the floor and trans cover out this evening, here is the...