By the way, the serial number of my car is 49165782. Maybe there is some correlation to the '50 Pacemaker you mentioned.
Hi Doug...I see what you mean about the door not aligning at the A pillar. I have stripped away the weatherstrip so what you see isn't flattened weat...
[quote="Kerry Dancy" post=18858]Gary, click on the link I posted above and it will show you the shake-n-brake tool. You can buy one at most auto body ...
[quote="Kerry Dancy" post=18848] Gary, I missed your first post. I have tried the hammer driver type of impact tool with minimum success. The Shak...
Doug...I've attached some more pictures and I'll answer your questions. There is no obvious damage or rot to the door check mount on the A pillar. I...
You guys are all fantastic with great information. I'm including a few more pictures of the door and hinges as well as the bottom of the A-pillar. B...
Kerry...I now see how it is used. Very clever. Thank you! How long is the bar that extends from the hinge attachment point? The frame is really...
Kerry...I've been studying the hinge tool you made. Can you use the tool with the door attached? I assume the three bolts are placed on either side ...
Kerry...I like porta=power and hinge tool. Does the front pillar have enough stiffness so that the hinge bends rather than twist the pillar? Tried d...
Here are some photos of both the passenger and driver side doors. You'll see that the passenger side gap is a bit wide at the top and narrows just a ...
Thanks for moving this to the correct forum. I thought I originally posted it to the Hudson forum.