Thanks Doug, your explanation of the Torus hitting the flywheel sounds likely, given the source of the noise. I will investigate further. I use the c...
Thanks Rob, I have checked, but the noise is not coming from the linkage. The noise is definitely coming from the transmission, it seems to be loudes...
Hi Frank, the plunger was not stuck mid way, and seemed to be moving quite freely. The problem I experienced was in trying to extract the pluger from...
Hi david, I will look into that at the same time as I adjust the valve lash. I am hearing some tapping noise when starting the engine from cold, thet ...
I found the plunger was moving freely at the far end of its travel and was able to move it around with my finger, but I could not remove it as it stuc...
Frank, thanks again for all the information. I am inclined to try to replace the spring. If you are able to locate thet details for a spring I would ...
I have just found the receipt showing in addition to new pistons and rings, a set of main bearings (-30 thou), rod bearings (-30 thou), oil pump kit,...