There is a p0lug in the axle housing that allows you to fit a grease nipple to lube the bearings but be very careful that you do not blow the grease...
That is correct. The 1928 Essex used the same distributor, except it had an electrolock cable in place of the terminal on the side.
The vacuum advance mechanism will make no difference to the starting or performance. It is purely an economy device. It advances the timing under l...
Insert a cap screw in the sump bolt hole in the bottom of the bearing cap and using a pinch bar or claw hammer, lever the cap down.
The sending unit is a bi-metal, not a resistor, so you cannot test for ohms reading. If you do it will most likely read zero ohms, because it make-a...
One of my pet gripes is upholsters who give no thought to accessibility for servicing. Likewise auto-electricians who fit components like regulator...
The 1952 system has a 5 volt regulator under the dash, for the instruments, so this will work with 12 volts, but will pulse a bit quicker. the sender...