Forum

hudtruck
@hudtruck
Registered
Trusted Member
Joined: Sep 13, 2012
Topics: 4 / Replies: 64
Reply
Oil Tubes

I do agree that it is a must to use flex line when the filter canister is mounted on the firewall, like my friends Graham. But no vibration will affec...

11 years ago
Forum
Reply
Upholstery Fabric for 1953 Hornet

Richard, Does SMS sell the 53 Hornet box check pattern for the blue interior? Hornets either had "Durafab" in Green or Blue. But, 4 out of 5 cars were...

11 years ago
Forum
Reply
Oil Tubes

Josh, Fram oil filters used "rubber" lines on the inlet and outlet, but I don't trust rubber. Only a few seconds of a failure in those lines will cau...

11 years ago
Forum
Reply
REPRODUCTION STEP DOWN GAS TANKS

I would be interested. Please keep us informed, thanks.

11 years ago
Forum
Reply
coolant temp sender--replacement?

If it is the 1950 engine they used an Echlin TS-6153, in 1951 to 55 the sender part is TS-4. I thought that the 48 to 50s were difficult to find.

11 years ago
Forum
Reply
1200 dollar wiring harness alternatives?

Well, although we hate to admit it , some day you will sell your car. The car with modern vinyl wiring installed vs the original style cloth (coated) ...

12 years ago
Forum
Reply
Electric Fuel Pump safety

Thanks for the tip Richard. I have tried to send that message to folks for years in different clubs. As a retired police officer I sadly have had to ...

12 years ago
Forum
Reply
Engine mounts and fabric glue questions

Mike, regards to the motor mounts. On occasions originals( a square/Rectangular style) show up on Ebay or maybe some accommodating member has a set fo...

12 years ago
Forum
Reply
Generator cutout

Park, I presented this to the Model A guys on the Ford Barn. They all were in agreement that the NON- Diode type will work. Many Ford guys add polari...

12 years ago
Forum
Reply
Generator cutout

I saw that. How would that affect the operation. Would the voltage jump from the points ( in the cutout) backwards, or would the cutout totally not fu...

12 years ago
Forum
Reply
Generator cutout

Park, would a model A Ford work. Cheap & plentiful. Positive GRD. They can be ordered with a Diode for reliability. I don't know how Ford cutout will ...

12 years ago
Forum
Reply
Radiator overflow leak

That is the new crossover number for Stant. Interesting note: About 1953 the AC Division changed the nomenclature numbers to be separate from the GM p...

12 years ago
Forum
Reply
REPRODUCTION STEP DOWN GAS TANKS

Tim, based on the survival rate of the two brands being pretty close, about 1%, the parts market for the remaining cars should be close. Yes, I agree ...

12 years ago
Forum
Reply
Radiator overflow leak

Gary, as Ken said drop the level to half way between the tanks bottom and the radiator neck or at least 1-1.5 inchs below the neck. Also the correct c...

12 years ago
Forum
Reply
REPRODUCTION STEP DOWN GAS TANKS

The issue, IMO, is not the amount of production but the lack of desire of any HET parts suppliers.That is the ones that have National/International ...

12 years ago
Forum
Page 2 / 5