Correction... Eshelman gear is .765 on the hub not .7565.
I went into my shop and measured the size of the Ford gear vs the Eshelman gear. Ford was as you said .750" and the Eshelman gear is .765". Many guys ...
I replaced the passenger side, but it shouldn't matter. The housing is a mirror image. The gears are exactly the same for either side. I have a extra ...
Wow! I didn't need to do anything except drill out the original housing rivets and swap the gears. It worked perfectly... still does. It appears in p...
Met Pit Stop in N Holywood,, Kip Motors in Dallas Tx
Or, purchase a infra red thermometer and shoot a beam at the thermo housing, top tank, and the cooler lower hose flange. I used to use my wifes' candy...
I'm curious, does the engine have hydraulic lifters? 1956 only, right?
That's what I do in the swaps book that I bought from the late Lou Backus. Only problem is, it's so old, that the crossover parts are just as hard to ...
Walt is good, as is Daytona Parts in Florida.
As the guys say... drop the pan. I bought a '50 Caddy with 70k miles, but it sat for 17 years. I drained the oil first thing. The dip stick showed a...
Josh, Did you check to see if there is GOOD spark from the distributor to the coil , then coil to the spark plugs. Hold the coil wire a bout a 1/2 inc...
Walt is absolutely correct... and do not powder coat them either. There is sound deadening material that will quickly disintegrate with the heat fro...