Forum

GJevne
@gjevne
Registered
Honorable Member
Joined: Oct 13, 2012
Topics: 59 / Replies: 527
Reply
how to check the brake fluid level in 1951 hornet

I would invest in a shop manual. You can buy them from the club store, or there are many used ones available online. Of course, others have already ...

9 years ago
Forum
Reply
Iso information!

Hi Anna, Good to see you here!

9 years ago
Forum
Reply
Hudson Head - 232 or 262?

FOr 232, I the 1950 (first year) heads clearly have the number 500 markedon the top. Subsequent years had 232 marked on the top. For 48-54, all ...

9 years ago
Forum
Reply
Noise in rebuilt 212 engine, 1947 Hudson

He probably forgot to put the brass shims back on between the rods/rod caps. There are little brass shims that are installed between cap and rod on e...

9 years ago
Forum
Reply
Under Hood Insulation?

Never saw that on any stepdown Hudson. There was insulation of the 55-57 Hudson hoods though.

9 years ago
Forum
Reply
1941 Hudson 6 rebuild (175CI)

Thanks Per! Eventually, that's in the plans -- will rebuild the engine. But I'm pretty sure the head gasket is gone. Getting some leakage of hot ...

9 years ago
Forum
Reply
1941 Hudson 6 rebuild (175CI)

Charles, I have the same car with original engine and had pretty much the same problems. Didn't take the engine apart, yet. Did get it to run and...

9 years ago
Forum
Reply
Hudson Rocker panels

Of course "argent" is the latin derived word, argentum, meaning silver. Ag symbol on the periodic table.

9 years ago
Forum
Reply
1932 Hudson 8

Pretty sure these were all a kind of gray green color. I don't know the exact formula, but perhaps someone has a good way to match the color. I'm in...

9 years ago
Forum
Reply
Rocker Panel Removal

Looks great Frank! Maybe this is your next business venture? Do you know what Al Henry may have cobbled together on that car when he restored it? O...

9 years ago
Forum
Reply
Rocker Panel Removal

The stainless trim on the bottom of the doors serves no other purpose but to continue the trim line that is necessary to cover the bolts for rocker to...

9 years ago
Forum
Reply
Rocker Panel Removal

Yes, the rocker panel has the larger trim covering (stainless) that covers the bolts at the bottom. That stainless trim must come off first, then you...

9 years ago
Forum
Reply
Rocker Panel Removal

John, There's a little trim piece (think it's painted, not stainless on 51, that covers the bolts that attach the rocker to the front fender. In ...

9 years ago
Forum
Reply
232 engine

THe heads on the 1950 232 cid engines said "500" which was the Pacemaker series designation.

9 years ago
Forum
Page 5 / 40