Per, Just send enough for postage. Happy to help you out. Rod
Per, The June 1975 issue has a drawing of the front of a "35, but that is all I see. Rod
My collection starts in 1970. Let me know what you need. Rod[size=5][/size]
You may have just found your own problem. If you get anywhere near correct with a vacuum gauge it is a miracle. Take it from an old timer who has been...
If you adjust the ignition timing with a timing light, you must disconnect the vacuum advance first. If the advance is working and you do not disconne...
I use a 180 thermostat at 90 degrees with no problems. Once the thermostat is open the water obviously flows at the same rate regardless of the thermo...
I recommend you send it to the guys in Texas.
The most common cause of this problem is rebuilt clutches which still had moisture in the corks.Corks are wet when installed and require a lot of baki...
Did this clutch work properly before the transmission job? I am curious about this problem because years ago we rebuilt hundreds of Hudson clutches an...
Overflow tank not needed. The top tank is not supposed to be full. Actually, if the fluid just covers the tubes with cold engine it works perfectly.
Don't believe it makes any difference.
Overflow tank not needed. The top tank is not supposed to be full. Actually, if the fluid just covers the top of the tubes when the engine is cold, it...
Don't need overflow bottle. The top tank is not supposed to be full. In practice, if the fluid just covers the top of the tubes whwen the engine is co...
Clutch is obviously not releasing. How much free play is there at the top of the clutch pedal?