Jeremy Burris rebuilds these 30's pumps with modern seals and bearings.
[size=200]You put the lever's shaft into the hole in the side of the driver's side seat track and hook the little spring up, and then put the seat tr...
Is this for a Stepdown Commodore of the 1948-52 vintage, or the older 41-47 vintage? They are somewhat different.
Alex Burr passes away on Wednesday, the 22nd of December 2021. His contributions will not be forgotten. May he rest in peace.
Had a new master cylinder to frame Tee hose made locally using BrakeQuip parts today. Cost is up about 30-35% from the 2014 cost that John Forkner pai...
You can pump the brakes, and it will temporarily firm up the pedal, but that is not something I would consider a safe solution for driving the car in ...
Doorsills, LLC – Donald P. Kuehn 81 Graham Avenue, North Haledon, NJ 07508-2909. FAX 973 904-0433 Office 973 904-0270
Those two cable tighteners shown are not mentioned in the shop manual because they don't even belong there. That was someone's half-assed attempt to c...
Hello, YES, the parking brake cable has to be removed by pulling up the U shaped clip at where the cable housing form the parking brake handle passes ...
I have a pair on the 54 parts car. If you don't get them elsewhere, let me know. Kenneth
=13.6pxHANDY SHIFT =10.4pxConstruction =12px"Handy Shift" gear shifting mechanism is =12pxoperated from a control lever located just =12pxbelow ...
May be as simple as loosening the bolt holding the upper adjustment on top of the steering column, just behind the steering box and sliding the bracke...
When installing lap belts in a car with separate body and frame, the anchor points should be on the floor, with a reinforcing plate. Under NO circumst...
Looks like Mt Kimball to the east. Does the Traveler have the 175 or the optional 212 motor? I am putting finishing touches on a 41 10T in TX.