Some one was selling reproduction Twin H linkage on EBay a few years back. AL Saffrahn has asked me to help locate the vendor. Does any one know this fellow and how we can get in contact. I bought one set for my project and was very happy with the quality.
Thanks,
Richard Griffith/ Northern California Chapter
I would love to know this as well. I'm considering putting Twin H on my car, but am reluctant because people have said the linkages are impossible to find.
Don Cnane in Colorado was the source of the linkage. He is an HET member.
Yes, we bought the Twin H linkage from Don Crane in Colorado. This setup DOES NOT include the twin H specific bellcrank, nor the short linkage between the bellcrank and the cross shaft linkage that Don DOES supply. The kit is the part that fastens to the head under the head bolts and includes the threaded clevis cross shafts that clip to the carburetors throttle levers. I made the short @4" link with the two little ball joints myself. The correct Twin H with Hydramatic bellcrank we obtained from Lance Walker in NC.
Do you have any contact information for Don Crane? Does he have a website or anything?
No he does not have a website. Look him up in the Club roster, Don Crane in Colorado. He goes by the user name "Skiforlife65" on this forum.
HETski4life@msn.com
HETski4life@hotmail.com
are the two email addresses I have for Don "Crane. Drop the HET before sending.
I was able to contact him using the hotmail address. He said that he sold all 50 that he made, but may [i]possibly[/i] make more after the new year.
I offered him a pattern if he needs it. If Don says he is going to do it, he will. Just stay in touch with him.
Leave a reply
